Using S1, S2 to activate CC 64

suilebhain · Post by **suilebhain** » Thu Apr 23, 2015 2:33 pm

I've set S1 to CC 64 and it doesn't seem to work. Considering it is only an ON/OFF type of controller, shouldn't the Fusion respond in an appropriate manner?

Post by **Jesse** » Thu Apr 23, 2015 3:21 pm

What are your midi settings in the global settings on the Fusion?

suilebhain · Post by **suilebhain** » Mon Apr 27, 2015 1:45 pm

In Global/Controls set S1 and/or to CC 64 but it doesn't seem to work.

I also have tried a sustain pedal, plugging it in before turning on the Fusion but that doesn't seem to work, either. It is almost like my system does not recognize CC 64. What kind of sustain pedal have you used with success? I tried an On-Stage and a Quik Lok pedal.

Post by **Jesse** » Mon Apr 27, 2015 4:18 pm

I have used an Alesis CF1 and a simple Yamaha sustain pedal both work fine, they must be plugged into the Fusion before turning on the Fusion.

My Settings - Pics reinstalled today 10-12-2021 by JMS

: Fusion Global Settings MIDI; Fusion Global Settings MIDI.jpg (58.41 KiB) Viewed 3286 times

: Fusion Global Settings Controls; Fusion Global Settings Controls.jpg (58.35 KiB) Viewed 3286 times

Post by **Jesse** » Mon Apr 27, 2015 4:31 pm

Check out psionics Fusion Tips MIDI section hear
https://www.alesismusic.com/viewtopic.p ... 0&start=15 Link edited to work in Alesis Music.com by JMS 10-12-2021

suilebhain · Post by **suilebhain** » Mon Apr 27, 2015 4:32 pm

Thanks! I'll give that a try.

suilebhain · Post by **suilebhain** » Mon Apr 27, 2015 4:41 pm

If I recall, Yamaha-style pedals are different from Korg-style and I think Korg-style are the default (PS-10). My Quik-Lok pedal changes from PS-10 to PS-15 with a switch on its bottom so perhaps that is what is not working for me. The On-Stage is strictly PS-10, works with my Novation keyboards.

I'll have to wait until tonight to see. Thanks!

sonicwarrior · Post by **sonicwarrior** » Mon Apr 27, 2015 7:07 pm

Jesse wrote:My Settings

How did you make this screen shots?

Post by **Jesse** » Tue Apr 28, 2015 12:48 am

sonicwarrior wrote:
Jesse wrote:My Settings
How did you make this screen shots?

Assign +T4 Creates a screendump on the CF card. It creates a bitmap image so I have to convert it to a jpg to post it

Known key combinations
http://www.promusicproducts.com/forum/p ... php?id=107

sonicwarrior · Post by **sonicwarrior** » Tue Apr 28, 2015 10:41 am

Thanks a lot.

AlesisMusic.com - The Unofficial Alesis Support Forum

Using S1, S2 to activate CC 64

Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64

Re: Using S1, S2 to activate CC 64